|
Help !
Oct 8, 2013 16:32:30 GMT -5
Post by redhotchilipeppa on Oct 8, 2013 16:32:30 GMT -5
Hi there !
I just bought a DDrum 4 from a guy and I want to upload some sounds with my Midi cable (PRODIPE MIDI USB 1 in 1 out) and I can't get connection between the module and the cable. i follow the steps of Otacon tutorial but the ddrum tool fail when sending sounds because of this absence of signal... "The ddrum Tool don't answer"... I absolutely have to add sounds because I don't like the module sounds !
also...: The version of the module is 1.40... Is it possible to upgrade ?
Sorry for my poor english... Thanks for the help
Mitch
|
|
berk
Member
Posts: 13
|
Help !
Oct 8, 2013 16:46:48 GMT -5
Post by berk on Oct 8, 2013 16:46:48 GMT -5
This might be way to obvious, but are your midi cables plugged in the correct way? (ie. PC midi output to ddrum midi input and ddrum midi output to PC midi input) Also, are you sure you've selected the correct usb midi device in the ddrum tool midi setup page?
|
|
|
Help !
Oct 9, 2013 6:24:44 GMT -5
Post by Hello on Oct 9, 2013 6:24:44 GMT -5
Hi !
Yes, I checked all cables, and the USB is correctly connected to my PC, the MIDI cables (in and out) are correctly connected to the DDrum Module.
|
|
berk
Member
Posts: 13
|
Help !
Oct 10, 2013 19:13:39 GMT -5
Post by berk on Oct 10, 2013 19:13:39 GMT -5
Do you have any other midi instruments you can hook up to the PC to confirm that your interface is working correctly?
|
|
|
Help !
Oct 11, 2013 14:51:06 GMT -5
Post by redhotchilipeppa on Oct 11, 2013 14:51:06 GMT -5
No, I'm gonna ask for one to my friends !
|
|
|
Help !
Oct 15, 2013 7:56:04 GMT -5
Post by kyrrinstoch on Oct 15, 2013 7:56:04 GMT -5
Mitch, it's entirely possible to update the firmware. The latest release was version 1.50, but I've also seen a 1.52, which is only applicable to units after a specific serial number. Before you ask, no, I don't know what that number is off the top of my head : You may want to try contacting Armadillo Enterprises (the current ddrum company) as they used to be the authorized service center here in the US and would likely know. Otherwise you could try and reach out to the folks at Clavia to see if they still have the information.
|
|
|
Help !
Oct 16, 2013 8:59:36 GMT -5
Post by redhotchilipeppa on Oct 16, 2013 8:59:36 GMT -5
Thanks for the help !
|
|