Problem with rim

milsik
Member

Posts: 13

Problem with rim May 16, 2012 9:38:58 GMT -5

Quote

Post by milsik on May 16, 2012 9:38:58 GMT -5

Hi,

I have a problem with the rim. I use triggers pro and meshhead. I can not adjust the rim sensitivity. When hitting the head sometimes appears in the signal from the rim and does not always beep when hitting the rim. I tried to adjust the sensitivity of the pads and change the setting. Can anyone help? I'm using 1.3 DD4

Deleted Deleted Member Posts: 0	Problem with rim May 17, 2012 13:20:39 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by Deleted on May 17, 2012 13:20:39 GMT -5 Are you using XLR y-cable to two 1/4" plugs? One to snare input and one to rim input?

milsik Member Posts: 13	Problem with rim May 18, 2012 10:38:59 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by milsik on May 18, 2012 10:38:59 GMT -5 Yes, of course.

kyrrinstoch Moderator Posts: 84	Problem with rim May 30, 2012 7:24:00 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by kyrrinstoch on May 30, 2012 7:24:00 GMT -5 are you sure you have the connections to the correct jacks on your dd4? Try switching them around and see if that makes any difference.

milsik Member Posts: 13	Problem with rim May 31, 2012 4:27:03 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by milsik on May 31, 2012 4:27:03 GMT -5 problem solved. The cause was a poorly chosen parameter Threshold on rim
	Last Edit: May 31, 2012 8:06:53 GMT -5 by milsik

Post by milsik on May 16, 2012 9:38:58 GMT -5

Post by Deleted on May 17, 2012 13:20:39 GMT -5

Post by milsik on May 18, 2012 10:38:59 GMT -5

Post by kyrrinstoch on May 30, 2012 7:24:00 GMT -5

Post by milsik on May 31, 2012 4:27:03 GMT -5

Quick Reply