dino
New Member
Posts: 8
|
hi hat
Mar 29, 2012 15:18:01 GMT -5
Post by dino on Mar 29, 2012 15:18:01 GMT -5
Well havent messed with my ddrums in awhile, and when I set them up recently I couldnt get the hi hat to work. Thanks to this forum, you guys reminded me that it needs the stereo cable to function properly. ;D
Dino
|
|
|
hi hat
Mar 30, 2012 9:27:07 GMT -5
Post by sam(otacon28) on Mar 30, 2012 9:27:07 GMT -5
Also remember that you may have to re-calibrate the hi hat controller also . It's pretty easy to do so if you're not sure on how to do it , take a look below .
Here's a step by step for calibrating the ddrum cast hi-hat controller
1. Let the hi-hat clutch fall down on the hi-hat controller by its own weight
2. Press the System button until you get to the Trig Input mode for channel 10 . Select "HHT" with the Rotary Dial
3. Without touching the hi-hat stand , hold Shift and press Exit . The Display will briefly show "CAL" and the calibration is completed
4. Secure the hi-hat clutch at a comfortable height for playing
5. That's all that is needed to calibrate a working hi-hat clutch with the ddrum4 module . Once it's calibrated the ddrum4 module will store that info . but from time to time you may need to re-calibrate the clutch if you disconnect it or move it from place to place when transporting the drumset .
sam(otacon28)
|
|