|
Post by milsik on Feb 9, 2012 15:57:43 GMT -5
I have a problem with soldering the cable to the snare. Could someone write how to properly connect the wires? I use ddrum pro trigger.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 9, 2012 16:53:51 GMT -5
I have my triggers in my rehersal space, but I'm pretty sure it's: Pin 1 GND Pin 2 Snare Head Pin 3 Rim
The ddrum modules does not feature any dual / stereo input for both the head and the rim, so you would need to get / make a splitter if you want to use both, or use two separate cables from the XLR. Pinouts should be:
Plug for Snare Head: Sleeve - GND (from pin 1) Tip - Snare Head (from pin 2)
Plug for Rim: Sleeve - GND (from pin 1) Tip - Rim (from pin 3)
|
|
|
Post by milsik on Feb 10, 2012 10:27:32 GMT -5
It works, thank you:)
|
|