yan
New Member
Posts: 5
|
Post by yan on Dec 28, 2011 9:10:36 GMT -5
Hi ! it looks like it really dead ((
At first.. his brain refused to play the downloaded sample (from signatured...) And after power off/on it can show only the software version 1.5 and.. nothing at all (((((
he-e-eeeelp me please ((((
|
|
|
Post by kjob3022 on Dec 28, 2011 11:21:12 GMT -5
You came to the right place.The musicians here know ddrum better than ddrum.If your problem has a way out,these guys will find it.My first week here I thought my channels were dead and they fixed it.Be patient,they will get to you and help.- kenny
|
|
|
Post by kyrrinstoch on Dec 28, 2011 14:13:49 GMT -5
Yan, first thing I'd suggest would be to go through and check to make sure you have sounds loaded in the module. Once in a while a sound won't transfer or it'll get transferred incorrectly (only seen this on mine 3 times in 12+ years).
After that, I'd make sure you have your outputs routed correctly (sounds set to use B outputs only and you're listening though headphones would be an example).
If that still doesn't help, I'd do a Factory Reset as outlined in your manual. Mine was locking up on me and a Factory Reset followed by a complete reload of all my sounds fixed it.
|
|
yan
New Member
Posts: 5
|
Post by yan on Dec 28, 2011 16:57:54 GMT -5
thank you kjob3022.. I hope so..
kyrrinstoch .. the problem is.. I can't do anything at all. After the power ON I see the firmware version and than "0" and nothing more. there is no any reaction on any buttons pressing (system, shift and other). there is no any LED , just only a "0" at the display.
Also, the same picture when I change eprom to 1.3* (but on display "1" instead of '0' and no any reaction at all)
|
|
|
Post by kjob3022 on Jan 9, 2012 17:02:00 GMT -5
Hey Yan,any luck? -Kenny
|
|
yan
New Member
Posts: 5
|
Post by yan on Feb 21, 2012 9:57:35 GMT -5
(( there is no happiness in life..
Guys, somebody sells it? (I know that current ebay price is $499.. but who knows.. besides I never had deal with ebay..)
( katletych at gmail.com )
|
|
|
Post by sam(otacon28) on Feb 21, 2012 13:11:10 GMT -5
Might be something that you have allready tried but have you ever tried replacing the firmware eprom in the module ? If it's powering up , but that's all it is doing it may be that the eprom chipset has gone bad . If you haven't tried that yet it might be worth taking a look .
sam(otacon28)
|
|
yan
New Member
Posts: 5
|
Post by yan on Feb 22, 2012 15:46:56 GMT -5
unfortunately .. already tried (( thank you, sam ..
|
|