vaas
New Member
Posts: 3
|
Post by vaas on Apr 15, 2020 1:55:31 GMT -5
Hey all, I just fixed up a mesh head kit with Red Shot triggers and feed them into a DDTI unit. The unit triggers sounds from my Roland SPD-S and it works great. However, I can only play one surface at a time; when I for instance play the two toms at exactly the same time, only one tom will produce sound. Am I doing something wrong? Do I need to change certain settings in the DDTI? I tried to alter the crosstalk value but it didn't have any effect.
Thanks! vaas
|
|
|
|
Post by kenjwright on Apr 15, 2020 20:01:46 GMT -5
Hello vaas. I am not familiar with the Roland pad however I do have a DDTi. As a test I connected the DDTi to a ddrum4 module via Midi. All drum pads can be struck simultaneously and the module responds on all channels as if the pads were connected directly so not sure what might be causing your particular issue. The stock settings for x-talk and threshold should be sufficient for testing.
Regards,
Ken
|
|
vaas
New Member
Posts: 3
|
Post by vaas on Apr 17, 2020 13:12:20 GMT -5
Hey Ken, thanks for your message. I connected the DDTI to my laptop, triggering drum sounds in Cubase. Same thing happens: strike two pads at exactly the same time and only one corresponding sound is heard. No matter what I tweak inside the DDTI settings (cross talk, midi channel, threshold, etc), there's no change.
Any other ideas?
|
|
|
|
Post by kenjwright on Apr 17, 2020 18:32:45 GMT -5
Hi vass, trying to replicate your scenario as closely as possible, I Midi'd the DDTi (using iConnect USB interface) to my MacBook Pro running Logic Pro, played one pad one at a time, then two at the same time. The attached image shows all of the DDTi settings (for both pad inputs) and also at the bottom is the result in Logic. All shows as expected. So does not answer what is not working in your setup but at least provides something to compare to. Regards, Ken  |
|
vaas
New Member
Posts: 3
|
Post by vaas on Apr 20, 2020 6:09:00 GMT -5
Hey Ken, thanks again for taking the time to help me out. I'm gonna try your settings, plus I'm gonna exchange the triggered mesh heads for rubber pads. See if that makes a difference. Will post the results here, thanks!
|
|
|
|
Post by TofToilor on Dec 30, 2020 8:10:16 GMT -5
Bonjour à tous les batteurs !!
Peut être que quelqu'un pourrait m'aider.
Je viens d'acheter un module ddti ddrum... Sauf que je ne sais pas le configurer. Par exemple ma caisse claire fonctionne bien. Par contre mon Tom 1 le son est triplé je voudrais savoir comment changé ça. La notice est en anglais. Est-ce que il existe un tutoriel en français ou autre pour régler mon problème. J'ai également acheter un ancien module de son yamaha dt express que j'ai branché directement a part et j'ai le même souci...aidez moi s'il vous plaît 😭
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 30, 2020 13:04:50 GMT -5
Bonjour à tous les batteurs !! Peut être que quelqu'un pourrait m'aider. Je viens d'acheter un module ddti ddrum... Sauf que je ne sais pas le configurer. Par exemple ma caisse claire fonctionne bien. Par contre mon Tom 1 le son est triplé je voudrais savoir comment changé ça. La notice est en anglais. Est-ce que il existe un tutoriel en français ou autre pour régler mon problème. J'ai également acheter un ancien module de son yamaha dt express que j'ai branché directement a part et j'ai le même souci...aidez moi s'il vous plaît 😭 Salut. (Traduit par google translate): Alesis Trigger io est le même que ddrum ddti. Cliquez sur le manuel "Quick Start". Il a du français. www.alesis.com/products/legacy/triggerio |
|
