|
Post by Alicefan on Jan 31, 2017 17:05:49 GMT -5
Hello I'm new here, I have just bought a DDrum4 module When I switch the module on it says 1.50 then PAL. My problem is the module only has Snare Kicks and Tom samples and no cymbal or percussion samples,could somebody help me to be able to restore the module as it was. I have downloaded all the free kits and the DDrum4 Tool and I have a Midi lead. I have tried factory reset but that just leaves me with the same sounds. Appreciate any help. Thank's
|
|
|
Post by kjob3022 on Feb 4, 2017 5:00:58 GMT -5
Do you have a Ddrum4 SE manual?If not,download from this site under manuals.If you do,read entirely because it's important for showing you where samples are and how to put the correct settings to access them,if after you have read the manual and still can't get the samples to work,I can try and help.The manual is the key though,....Ken
|
|
|
Post by trussmonkey on Mar 12, 2017 1:19:10 GMT -5
hallo, Default the machine and look at what sample sound #s in the P1-26 and F27-99 via the 1.5x it will show you the samples you need to load to get you sounds to match the presets, their is also a midi file that you can load that has those # patches. I think the 1.5 software version only work with the SE add on drum sounds along with the 1.4x ver percussion and assorted sounds
|
|
|
Post by trussmonkey on Mar 14, 2017 1:07:03 GMT -5
|
|
|
Post by kjob3022 on Aug 29, 2017 3:58:49 GMT -5
What do mean by " default the machine"? I also now have a module with only kick,snare,toms-no cymbals or percussion and I can't seem to bring them up via module.Are these hiding under a midi setting?Thanks for any help,Ken
|
|