|
Ddrum 3
Mar 7, 2014 11:31:55 GMT -5
Post by kaiser on Mar 7, 2014 11:31:55 GMT -5
Just Bought an european Version Of A Ddrum 3 . Do I need a converter from 220 V To 110 V or is there an adjustement inside the module that I could use ? Thanks
|
|
berk
Member
Posts: 13
|
Ddrum 3
Mar 12, 2014 15:23:06 GMT -5
Post by berk on Mar 12, 2014 15:23:06 GMT -5
I bought a ddrum3 from the US and converted it to 240V for use in Australia. I can't remember exactly, but I'm pretty sure there is a switch inside the case. I definitely didn't do any major modifications.
|
|
Deleted
Deleted Member
Posts: 0
|
Ddrum 3
Mar 18, 2014 13:56:32 GMT -5
Post by Deleted on Mar 18, 2014 13:56:32 GMT -5
It's no switch but the primary of the power transformer is separated in two windings. For 230 you put a jumper, for 110 you... do something else I'd check if you find a spec sheet for the transformer and see how it's supposed to be jumpered for 110V. Might want to try it without the ribboncable connected to the mainboard. Don't want to fry that one.
|
|