|
Post by 0127frey on May 6, 2013 11:09:31 GMT -5
Just wonder if anyone could give me any advice on how i'm going to have to go about setting the Module,Well i have an Axis Double Pedal with eKits,so i need an extra channel for the 2nd Kick.I also use 5 Toms,so i also need 2 extra channels for toms,Is it possible to use the "Percussion & Cymbal 1&2 Palette",Or am i looking at the wrong way to go about this,Thanks
|
|
|
Post by kyrrinstoch on May 17, 2013 11:37:39 GMT -5
You can use any input for any trigger/pad, except the ddrum hihat, which needs to be connected on input #10.
The only reason you would want to use any specific input over another for a particular pad/trigger is if you needed the pressure sensing capability for choking, mutes or pitch bends.
For example - you could use your SNRE and RIM inputs for your bass triggers, so that when you use the Pallette mode, both would change at the same time (even though the sounds would be programmed independently).
|
|
|
Post by necroticus on Sept 15, 2019 4:49:22 GMT -5
Just plug your two eKits together with a Y cord. It works just fine.
|
|
|
Post by kjob3022 on Sept 19, 2019 3:50:07 GMT -5
Are you talking about 2 ddrum modules together with a y cord?
|
|